Product Description
OTOFIX D1 Pro is a 10.1-inch touchscreen advanced Bi-directional diagnostic tool that can do FCA Secure Gateway Access with AutoAuth subscription, Online coding, refresh hidden functions, and guided functions on supported vehicles. The OTOFIX D1 Pro is packaged in a carrying case, and includes free technical support, and two-year free software updates with a one-year limited warranty.
OTOFIX D1 PRO Automotive Diagnostic Scanner Guided Functions, CANFD & DOIP
OTOFIX D1 PRO Highlights:
- ECU Coding: Help to match the car with component control modules after replacing new ECUs. Online Coding for VW/Skoda/Peugeot/Citroen + Personalization for VW/Au-di/Skoda + Offline Coding for 25 models.
- 40+ Services: Serve for component reset/match/calibration and 99% of vehicle repair. With Oil Reset, EPB Reset, TPMS Reset, BMS Reset, Brake Bleeding, IMMO, In~jector Coding, SAS Reset, Sunroof, Throttle Matching, WIN DR ROOF, Seat Reset, Aftertreatment, Lang Change, etc.
- Personalization: Customize vehicle settings and activate high-end functions to improve vehicle safety or driving experience. Such as deactivating the auto start-stop, activating auto door lo~cking/unlo~cking, disabling vehicle chimes, etc.
- VAG Guided Functions: Provide onscreen operation instruction for complex ECU coding, component matching and calibration.
- All System Diagnostics: Do full vehicle system check, read fault codes, clean DTCs, view live data, read ECU information, freeze frame, and turn off the annoying “check engine” light, etc.
- Bi-directional Control: For quick problems location, you can widely apply OTOFIX scanner para autos to vehicle doors, windows, sunroof, wipers, headlights, radiator fans, etc.
- Programmable Module Installation: Relearn data to a new module and introduce it to the car system. Compatible with Ford, Mazda, etc.
- New CANFD/DoIP Protocol: V1 VCI is compliant with CANFD (for GM models) and DoIP (for BMW/Land Rover/Benz/Volvo/GM/VW/Au-di) that automatically identifies vehicle information and accelerate data transmission. OTOFIX D1 PRO gives you a wider range of model support.
- Auto Scan 2.0: Automatically identify the vehicle and scan all systems to get accurate diagnostics in seconds once connecting VCI with the vehicle , without manually inputting the VIN, improving 3x faster efficiency. Compatible with VW, Au-di, Skoda, Seat, Mercedes-Benz, GM, Chevrolet, Chrysler, Dodge, Jeep, Honda, Acura, Hyundai, Kia, Ni-ssan, Infiniti, Toyota, Lexus, Scion, Ford, Renault, Dacia, Samsung, Peugeot, Citroen, DS, BMW, Mini, etc
- Cloud Report Management: All the diagnostic reports can be well-managed via a cloud server and don’t take up extra memory space. It can be shared by mail, message, and QR code to customers.
- FCA SGW Vehicle Access & Renault Security Gateway Function: Allow you to secure visit FCA vehicles (for Fiat, Chrysler, Dodge, and Alfa Romeo 2017 later) & Renault models (Renault software needs to upgrade to V2.0 version) and skip the gateway limitation.
- 150 Makes & 10000 Models + 2-Year No-Charge Updating
Advanced ECU Coding - Customize the Vehicle Settings
More and more vehicle repairs are involved in electric module replacement or changing codes to improve vehicle behaviors, within the vehicle system, such as the engine, transmission, brakes, and suspension. However, only expensive car scanners with coding/programming capability can solve ECU-related issues.
OTOFIX D1 PRO automatic scan tool within 1000 bucks comes with advanced ECU Coding functions, online coding, personalization, programmable module installation (for Ford), etc., and performs the same repair as high-end diagnostic scanners.
ECU Online Coding: No need for manually input code, OTOFIX D1 PRO escaner automotriz professional can connect to the online server to automatically get/reprogram the code after replacing a new ECU module. Compatible with VW, Skoda, Peugeot, Citroen, DS, etc.
ECU Offline Coding: OTOFIX D1 PRO car scanner helps technicians to read the code from the original modules and match/reset/relearn the newly replaced ECU modules for 25+ models, such as Subaru, Land Rover, Jaguar, Peugeot, Citroen, DS, VW, Au-di, Skoda, VW CV, Bentley, Bugatti, Lamborghini, Man LD, Seat, LT3, Opel, Vauxhall, Mitsubishi, Porsche, etc.
Personalization/Flash Hidden Functions: Maximizing the vehicle owners’ preferences and customizing the vehicle’s pre-programmed settings as needed. This OTOFIX scan tool won’t change the software and only help to activate high-end functions or disable some unneeded functions for Au-di, VW, Skoda models. Such as deactivating the auto start/stop, mirrors automatic folding and unfolding, activating daytime running lights, etc.
NOTE: ECU Coding is NOT universally compatible with all vehicles, and varies by make, model, and year. Please confirm with us before purchasing.
40+ Maintenance Functions, Broader Coverage & Faster Updating
OTOFIX D1 PRO is a professional diagnostic tool for almost 99% of vehicle models, including passenger cars, SUVs, Sedans, and Pickups, which supports 40+ maintenance functions for all common repair needs. The vehicle model coverage (from 1996-2023) and diagnostic accuracy have gone far beyond other brand auto scanners. The high-frequency updating also leads you to act high-speed diagnostic way and get the new software data.
- Oil Reset: Reset the oil life system and turn off the oil light to start a new cycle.
- EPB Reset: Reset the calipers, brake discs or pads after replacing the electronic parking brake system.
- TPMS Reset: Reset the tire pressure system and turn off the MIL light.
- BMS Reset: Re-match the battery control module and motoring sensor.
- Brake Bleeding: Help empty the air after changing the brake pad, brake pad sensor, brake pump, ABS pump, etc.
- IMMO Reset: Disable the lost k~eys and add new k~eys & remote control for vehicles with low-grade anti-theft systems.
- Injector Coding: Code the in~jector after replacing or adjusting it to correct the fu~el injection volume of each cylinder more accurately.
- Steering Angle Reset: Reset the steering angle to zero to keep the car running straight.
- Sunroof Reset: Reset sunroof lo~cking & closing, closing on rainy days, slide/tilt sunroof memory function, outside temperature threshold, etc.
- Throttle Matching: Initialize the throttle actuators to the default situation.
- Windows Calibration: Perform door window matching to recover ECU original mode.
- Seat Calibration: Calibrate the memory in replaced or repaired seats.
- Lang Change: Change the instrument displaying language.
- Headlamp: Initialize the adaptive headlamp system.
- CHG Tire Size: Reset the tire system after retrofitting the tire with different sizes.
- Speed & PTO: Set the vehicle’s highest speed and power.
- Clutch Reset, Trans Adaptation, Airbag Reset, VIN, FRM Reset, Transport Mode, Rain/Light Sensor, ABSSRS, Cylinder, VGT Learn, A/F Setting, Automatic Start/Stop, Electronic Water Pump Start, HV Battery, ACC, AC...
New Technology, New Features Diagnoses Your Car In A Few Minutes
All System Diagnostics
OTOFIX D1 PRO, a new generation of full system diagnostic scanner, provides reading codes, viewing live data, checking ECU version information, clearing faulty codes, etc., which can not check Engine, Transmission, ABS, SRS, Throttle, TPMS, Battery, IMMO system, but also detect all parts of the vehicle ECU. Other diagnostic tools only work on the specific brand vehicle. OTOFIX D1 PRO can serve VW, Au-di, Skoda, Renault, Hyundai, Volvo, Ford, Benz, etc.
Bi-directional Control
OTOFIX D1 PRO is a bi-directional scan tool featuring various active tests that can send commands to check vehicle system is in good condition or not. Bi-directional control brings you an effective diagnostics to locate vehicle problems within 10 minutes. It can work on most ECUs such as windows, doors, wipers, headlamps, rear lights, actuators, pumps, valves etc., and operate compression test, door lo~cking test, sound horn test, etc., saving you more time and cost.
VAG Guided Functions
Designed for VAG vehicles (for Au-di, VW, Skoda, Seat, Porsche, etc), guided functions can skip over the security access/channel number to reduce the vehicle authority limitation and ease your diagnostics process. This scanner for all cars also provides OE-level tips & step-by-step instructions for reference and simplifies complicated diagnostics.
Auto Scan 2.0
Once you upgrade the VCI to the newest version, Auto Scan 2.0 empowers OTOFIX D1 PRO car diagnostic scanner to automatically identify vehicle information, get VIN code, and quickly operate all-system full-function diagnostics with 3x faster speed, without any manual selecting & inputting. Compatible with CAN vehicles, VW, Au-di, Skoda, Seat, Mercedes-Benz, GM, Chevrolet, Chrysler, Dodge, Jeep, Honda, Acura, Hyundai, Kia, Ni-ssan, Infiniti, Toyota, Lexus, Scion, Ford, Renault, Dacia, Samsung, Peugeot, Citroen, DS, Mini, etc.
Programmable Module Installation
Program data to a new module and introduce it to the car system. Compatible with Ford, Mazda, etc.
Online IMMO
Read online PIN codes for Au-di, VW, etc.
Outstanding Hardware Configuration Serves Faster Maintenance Speed
- Personalized Appearance Design: Light weight & portable size is molded to fit comfortably flexible movement in/out of the car.
- Core Processor & Android 10.0 OS: Process multi-tasks quickly and smoothly.
- HD 10.1-Inch Screen: Large touchscreen with 1920*1200 resolution offers a clearer view and smooth operation experience.
- 15000mAh Battery: One full charge works comfortably for a long-lasting use period of over 15 hours.
- Bigger 4GB+128GB Memory: Extended memory capacity (from 64GB to 128GB) allows you to save all diagnostic reports and resources without caring for narrow storage.
- BT & WiFi Connection: Establish more stable communication with the vehicles to perform diagnostics.
- V1 VCI: Featuring new Auto Scan 2.0 that runs automatic vehicle identification and 3x faster system diagnostics. Plug to communicate with vehicles, no more need for extra adapters. Compatible with BMW, Mercedes-Benz, VW, GM, Ford, Chrysler, Ni-ssan, Hyundai, KIA, Renault, PSA, etc.
- CANFD & DOIP: Compatible with DoIP & CAN FD protocols, OTOFIX D1 PRO diagnostic scan tool can run faster speed data transfer and diagnostics, which can serve more models like BMW, Land Rover, Mercedes-Benz, Volvo, VW, etc.
- Wider Vehicle Coverage: Work well on 150+ car makes and 10000+ models worldwide (from 1996 to 2023), including the FCA vehicles (Fiat, Chrysler, Dodge, Alfa Romeo, etc.) after 2018 and Renault models.
Specifications:
Processor |
Qualcomm 660 octa-core processor (1.8 GHz quadcore processor A53 + 2.2 GHz quad-core processor A73) |
Memory |
4 GB RAM & 128 GB |
Display |
10.1-inch TFT-LED capacitive touch screen with 1920 x 1200p resolution |
Connectivity |
Wi-Fi (802.11 a/b/g/n/ac) USB 2.0
Bluetooth V2.1 + EDR HDMI |
Power and Battery |
15,000 mAh 3.7 V lithium-polymer battery
Charging via 12 V AC/DC power supply |
Input Voltage |
12 V (9 to 24 V) |
Power Consumption |
6.5 W |
Operating Temperature |
0 to 50°C (32 to 122°F) |
Storage Temperature |
-10 to 60°C (14 to 140°F) |
Dimensions |
(W x H x D) 300 mm (11.8″) x 220 mm (8.7″) x 50 mm (2.0″) |
Weight NW |
1.24 kg (2 lb.) |
Protocols |
ISO 9142-2, ISO 14230-2, ISO 15765-4, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN |
Package Includes:
1pc x Main Unit
1pc x OTOFIX V1
1pc x Type-C USB Cable
1pc x AC/DC External Power Adapter
1pc x USB to Ethernet Adapter
1pc x Auxiliary Power Outlet Adapter
2pcs x Spare Fuses(6 x 30 mm)
1pc x Packing list
1pc x Quick reference guide
1pc x Soft Cloth
1pc x Carrying Case(480 x 362 x 142 mm)
Autel Hot Items, 100% Genuine, EU/UK Ship Original Launch X-431 Best Seller, Up To 30% OffAny questions, please don't hesitate to contact us:Email: sales@CarDiagTool.co.ukSkype: cardiag.co.ukWhatsapp:
+86 15002705698Scan QR Code to Order By Mobile PhoneShipping Method & Delivery:UK/EU Warehouse Shipping: 3-5 working days. Fast Delivery No Tax.
EU Check:
Ship from EUUK Check:
Ship from UKDHL Shipping: 5-7 working days, you need pay some tax to your customs. Usually we declare a lower price on DHL invoice to help with customs clearance. If your address belongs to remote area, customer will need to pay remote handling cost. Please remember to leave message if you have any special requirement.
Yanwen Express: 10-15 working days. No Tax or remote cost for European Countries.
Yodel/Royal Mail: Just for United Kingdom. No Tax, and the delivery is about 7-10 days.
Standard Post: The delivery is about 15-20 days, no tax. Order under $150 normally with default shipping Standard Post, customers can tick for Express Shipping Service to ship by DHL.
Warranty Item:Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year, free repair. Man-made damage need pay.
We not offer warranty on keys,cables,adapter,online sent software ,please notice it.